Out of stock
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
| Description |
| Price |
| Product variants |
| Spring Compressor — Coil Spring Removal & Installation ToolDedicated tool that safely compresses coil springs for suspension work without fighting factory tension. Engineered for controlled compression and release. Built for repeated use on different spring rates.
✓ Ships from FL Warehouse ✓ In-House Quality Check ✓ Direct-from-Warehouse
Key Features
Specs
Whats Included
Frequently Asked QuestionsWill this work on my lowering springs or just stock springs? Spring compressors are rated for a range of spring rates. Verify your spring's rate (usually marked on the coil) falls within the tool's capacity before clamping — stiffer aftermarket springs sometimes need higher compression force than stock. Do I need a jack or press to use this? You'll still need to support the vehicle on jack stands and remove the wheel and strut assembly. The compressor itself handles the spring tension once the assembly is on the bench — no hydraulic press required. What do I do if the compressor won't fully close on my spring? Loosen the adjustment points and reposition the clamps closer to the coil's center. If the spring diameter is significantly outside typical range, test-fit the tool before fully committing to a job — oversized or undersized springs may not seat properly. | Regular price
$99.99
Sale price
$99.99
Regular price
|
Out of stock
Dedicated tool that safely compresses coil springs for suspension work without fighting factory tension. Engineered for controlled compression and release. Built for repeated use on different spring rates.
Will this work on my lowering springs or just stock springs?
Spring compressors are rated for a range of spring rates. Verify your spring's rate (usually marked on the coil) falls within the tool's capacity before clamping — stiffer aftermarket springs sometimes need higher compression force than stock.
Do I need a jack or press to use this?
You'll still need to support the vehicle on jack stands and remove the wheel and strut assembly. The compressor itself handles the spring tension once the assembly is on the bench — no hydraulic press required.
What do I do if the compressor won't fully close on my spring?
Loosen the adjustment points and reposition the clamps closer to the coil's center. If the spring diameter is significantly outside typical range, test-fit the tool before fully committing to a job — oversized or undersized springs may not seat properly.
